Asterisk - Revision history

Franks at 19:14, 17 October 2006

2006-10-17T19:14:37Z

← Older revision		Revision as of 12:14, 17 October 2006
Line 83:		Line 83:
	; john@example.com will be emailed when there is a new voicemail		; john@example.com will be emailed when there is a new voicemail
	1 => 54322,The Family,john@example.com		1 => 54322,The Family,john@example.com



			== High-pitched squeal on telephone ==

			I had a high pitched squeal on my telephone once I started using the X100P card. It turns out this was because it was sharing an IRQ:

			# grep fxo /proc/interrupts
			169: 31418924 IO-APIC-level Intel 82801DB-ICH4, eth0, wcfxo

			This means I simly have to try another PCI slot until I'm not sharing an IRQ.

Franks: /* X100P card */ added BSD

2006-04-09T00:53:13Z

X100P card: added BSD

← Older revision		Revision as of 17:53, 8 April 2006
Line 1:		Line 1:
	== X100P card ==		== X100P card ==

			[[Linux]]:
	# lspci -lv \| less -XF		# lspci -lv \| less -XF

Line 11:		Line 12:
	Memory at fe9fd000 (32-bit, non-prefetchable) [size=4K]		Memory at fe9fd000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [40] Power Management version 2		Capabilities: [40] Power Management version 2

			[[BSD]]:
			# pciconf -lv \| less -XF
			none0@pci2:2:0: class=0x078000 card=0x00001057 chip=0x56081057 rev=0x00 hdr=0x00
			vendor = 'Motorola'
			device = 'SM56 PCI Fax Voice Modem'
			class = simple comms


	# lsmod \| less -XF		# lsmod \| less -XF
Line 24:		Line 33:
	Alarms Span		Alarms Span
	OK Wildcard X100P Board 1		OK Wildcard X100P Board 1



	== Voicmail Setup for single answering machine ==		== Voicmail Setup for single answering machine ==

Franks: /* Voicmail Setup for single answering machine */

2006-04-07T18:37:42Z

Voicmail Setup for single answering machine

← Older revision		Revision as of 11:37, 7 April 2006
Line 39:		Line 39:
	exten => 88,1,VoicemailMain		exten => 88,1,VoicemailMain
	exten => 88,2,Hangup		exten => 88,2,Hangup
	exten => t,1,BackGround(~~steph~~)		exten = t,1,Voicemail(1)
			exten = t,2,Hangup

			or you can make a personal greeting instead of the generic by replacing the "t" lines:

			exten => t,1,BackGround(alisonsayingleaveamessage)
			; make sure you have alisonsayingleaveanessage.gsm in your asterisk/sounds directory
	exten => t,2,Voicemail(s1)		exten => t,2,Voicemail(s1)
	exten => t,3,Hangup		exten => t,3,Hangup


	# cat voicemail.conf		# cat voicemail.conf

Franks at 18:33, 7 April 2006

2006-04-07T18:33:36Z

New page

== X100P card ==

# lspci -lv | less -XF

and see if you can find something similar:

0000:01:05.0 Communication controller: Motorola: Unknown device 5608
Subsystem: Motorola: Unknown device 0000
Flags: bus master, medium devsel, latency 64, IRQ 201
I/O ports at de00 [size=256]
Memory at fe9fd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2

# lsmod | less -XF

and see if you can find the same modules loaded:
ztdummy 3880 0
zaptel 227876 8 ztdummy,wcfxo
crc_ccitt 2144 1 zaptel
rtc 14420 1 ztdummy

now to try zttool:
# zttool
Alarms Span
OK Wildcard X100P Board 1

== Voicmail Setup for single answering machine ==

# cat extensions.conf
[incoming]
exten => s,1,Wait,2
exten => s,2,Answer
exten => s,3,DigitTimeout,5
exten => s,4,ResponseTimeout,10
exten => s,5,WaitExten(3)
exten => #,1,Hangup
exten => 88,1,VoicemailMain
exten => 88,2,Hangup
exten => t,1,BackGround(steph)
exten => t,2,Voicemail(s1)
exten => t,3,Hangup

# cat voicemail.conf
[general]
; You may not want all of these formats "show file formats"
; at the Asterisk console for a list of formats available
format=wav49|gsm|wav
serveremail=asterisk
attach=yes
minmessage=3
skipms=3000
maxsilence=10
silencethreshold=128
maxlogins=3
; I have a script that changes permissions on new voicemails
; so I can use them in a webpage defined in externnotify
; externnotify=/usr/bin/vmperms
fromstring=The answering machine
emaildateformat=%A, %B %d, %Y at %r
[zonemessages]
eastern=America/New_York|'vm-received' Q 'digits/at' IMp
central=America/Chicago|'vm-received' Q 'digits/at' IMp
central24=America/Chicago|'vm-received' q 'digits/at' H N 'hours'
military=Zulu|'vm-received' q 'digits/at' H N 'hours' 'phonetic/z_p'
[default]
; 54322 is your password below
; john@example.com will be emailed when there is a new voicemail
1 => 54322,The Family,john@example.com